Membrane press ADAMIK AMP 350/170/40 HD

Modern trends in furniture production are no longer focused only on veneering, but on the contrary, on pressing decorative and highly durable materials such as HPL laminates, CPL foils (2D shape), stone veneers or decorative mats.

Membrane presses are a great help wherever a mold is needed to produce a part. ADAMIK presses allow you to highlight the design of the furniture you produce.

Apart from furniture production, our membrane presses are used in many other industries such as automotive, rolling stock, production of equipment for points of sale, hotels and restaurants.

The ADAMIK AMP 350/170/40 HD membrane press is a press from the new AMP HD series. It is equipped with a more powerful vacuum pump with an output of 40 m³/h. The usable pressing area is 3,300 x 1,500 mm.

The press has a wide range of uses – pressing flat parts (doors), shaped parts (door frames), bent parts (chairs, arches, etc.). It will replace the stacking press in small and medium-sized joinery.

Classic heating elements have been replaced by fans with heating, which not only ensure faster and more even heating of the working area thanks to air circulation, but also save electricity. Thanks to these design changes, the membrane is also much less thermally stressed and its lifespan is extended.

The press is standardly equipped with a rubber membrane with heat resistance up to 120 °C. Optionally, the press can also be equipped with a silicone membrane.

Advantages of the new AMP series of membrane presses:

• Even lifting of both the lid and the frame
• Oil pump with higher maximum pressure
• Increased diameters of vacuum distribution pipes for a pump with a capacity of 40 m3/h
• Easy membrane replacement
• External vacuum outlet for vacuum bag pressing (optional)

Note: If the price is not listed for the goods, the reason is that accurate pricing requires a more detailed specification of the client’s requirements, materials used, working environment, etc. In this case, please request a price quote and an ADAMIK sales and technical representative will contact you, who, after obtaining all the necessary information, will offer you the best possible solution for your operation.